Installation Of Bed Cleat:
-The bed rail system enables you to insert and move the tie-down cleat to the best location along the bed rail to secure a load.
-Loosen thumb wheel in a counter clockwise motion.
-Depress thumb wheel so locking plate maintains 1/2″ gap.
-Insert locking plate into the bed rail.
-Rotate tie-down cleat 90°and release thumb wheel.
-Slide cleat to closet detent in rail system. you will feel locking plate snap into detent.
-Tighten thumb wheel in a clockwhise motion until clutch mechanism ratchets.
-Check tie-down cleat to confirm that it is locked into detent and securely mounted to bed rail system.
Compatible with Following Vehicles
2021 Toyota Tacoma Limited, Nightshade, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail 2.7L L4 – Gas, 3.5L V6 – Gas
2020 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport 2.7L L4 – Gas, 3.5L V6 – Gas
2019 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport 2.7L L4 – Gas, 3.5L V6 – Gas
2018 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport 2.7L L4 – Gas, 3.5L V6 – Gas
2017 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport 2.7L L4 – Gas, 3.5L V6 – Gas
2016 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Sport 2.7L L4 – Gas, 3.5L V6 – Gas
2011 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2010 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2009 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2008 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2007 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2006 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas
2005 Toyota Tacoma Base, Pre Runner, X-Runner 2.7L L4 – Gas, 4.0L V6 – Gas