- 1x 25FT – 6AN Rubber Injection Fuel Hose.
- 2x 45 Degree – 6AN Push Lock Fuel Hose Fitting Adapter.
- 2×180 Degree – 6AN Push Lock Fuel Hose Fitting Adapter.
- 2x 6AN To 1/4 NPT Fuel Pump Adapters
- 2x 6AN to 3/8″ hose adapter fitting
- 1x 6AN to 5/16″ hose adapter fitting
- 1x AN6 to 3/8″quick disconnect male
- 6 x Straight – 6AN Push Lock Fuel Hose Fitting Adapter
- 1.Avoid twisting hose when installing.
- 2.Allow some slack in assembly for changes in length that occur under pressure.
- 3.When routing hose line, provide a smooth bend radius. Avoid sharp bends which may cause hose to collapse amd restrict flow.
- 4.If you need it,you can use appropriate techniques or cutting tools to build the hose.lt is reconmmended to wra it with tape before cutting, and try to use tools that can cut the end cleanly.
- 5. FIT E85
roger w pritt –
Rene C. –
Quality as described. If you decide to run hose separators with braided shielding I would purchase the 8AN separators. They’ll be snug, but work perfectly with these fuel injection hoses.
Matthew C. –
Very nice, very complete set of fuel line and fittings.